Adding an Options Menu

From GECK
Jump to: navigation, search

Disclaimer

This tutorial is split into two main parts. The first section is about how to set up your plugin to use an options menu, and focuses on where and how to set up your settings, and how to use them remotely. The second section is about making the actual menu, and focuses on giving the player access to the menu and the scripting involved in creating the menu.

If you're only reading this tutorial because you want to learn how to make a scripted menu, then I recommend that you skip straight to section 3. Alternately, a tutorial that focuses entirely on the scripting behind ShowMessage menus is available on cipscis.com. To view this tutorial, see the External Links section at the bottom of this page

Setting Up Your Plugin To Use An Options Menu

Creating an Options Menu is a good way to keep your plugin modular without having to make multiple plugin files available. It allows the user to change settings in-game.

The settings that can be changed in your options menu may be used in many different places in your Mod, so it's important that you know where to find them so that you can change them. If you know the location of the script in which the variable you want to use or change was declared, then you can access that variable from any script. To do this is we're going to create a Quest with a Variable Reservoir script. Let's give it the EditorID "ExampleVRQuest".

Variable Reservoirs

A Variable Reservoir script, or VR script, is one which contains only variable declarations. It will never actually run, but it gives you a specific location at which you can define all of your settings. The VR script that we'll be using in this tutorial will declare four variables:

ScriptName ExampleVRSCRIPT
short sAddExampleItem			; Default 1
short sItemCount			; Default 3

short sAddDamagedWeapon		; Default 0
float fDamagedWeaponHealthPercent	; Default 0.75

Keep in mind that these settings are only examples, yours will probably be completely different. As you can see, I've prefixed these variables according to their type (s for short, f for float), and named them according to their function. While it's up to you to choose a naming system that you're comfortable with, it's important that you name your variables according to their function. Don't start using variable names like "Variable1" or "ReferenceVariable", as these are ambiguous and it'll make your scripts very difficult to understand.

Now that you've defined your variables in a specific location, you can use them remotely in any script. The syntax for using a variable remotely is "LocationEditorID.VariableName", where LocationEditorID is the EditorID of the quest or reference that the script where the variable is declared is attached to.

Initialising Your Settings

At the moment, the variables that have just been declared have been initialised to a value of "0". However, we want most of our variables to be set to a default value other than 0. To do this, we're going to create a quest stage result script for stage 1 of ExampleVRQuest:

set ExampleVRQuest.sAddExampleItem to 1
set ExampleVRQuest.sItemCount to 3

set ExampleVRQuest.sAddDamagedWeapon to 0
set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.75

Note that, even though these variables are all initialised to 0, I have still set sAddDamagedWeapon to its default value of 0. Doing this means that you can create a "Defaults" button in your Options Menu that sets all settings to their default values by using SetStage.

Now, you need a way of running this initialisation script in order to set your settings to their default values. There are a few ways to do this, the one I'm going to describe here involves creating a separate "Initialisation Quest". Let's give it the EditorID "ExampleInitQuest".

An Initialisation Quest is a Start Game Enabled quest that stops itself with the StopQuest command after running its script once. It can be used to initialise any number of things - in this example we'll use it to initialise our variables by using SetStage:

ScriptName ExampleInitSCRIPT

Begin GameMode

	SetStage ExampleVRQuest 1
	StopQuest ExampleInitQuest

End

Now, when you first load the game with your plugin installed, your settings will be initialised to their default values. This means that you can now use them remotely, wherever they need to be used.

Using Your Settings

At the moment, all your settings are doing is sitting in your VR Quest at their default values. They're not actually doing anything, and changing them at this point wouldn't have any effect. Before there's any point in creating an options menu to change them, you'll have to utilise them remotely.

How exactly you do this will, of course, depend on the nature of your settings. The example settings used in this tutorial are just that, examples. Here's how I will be implementing them:

ScriptName ExampleItemDispenserSCRIPT

; This script is attached to an item dispenser
; When activated, it gives out either ExampleItems or Pencils

ref rActionRef

Begin OnActivate

	set rActionRef to GetActionRef
	if rActionRef
		if ExampleVRQuest.sAddExampleItem
			rActionRef.AddItem ExampleItem ExampleVRQuest.sItemCount
		else
			rActionRef.AddItem Pencil01 ExampleVRQuest.sItemCount
		endif
	endif

End
ScriptName ExampleWeaponsRackSCRIPT

; This script is attached to a weapons rack
; When activated, it gives out ExampleWeapons

ref rActionRef

Begin OnActivate

	set rActionRef to GetActionRef
	if rActionRef
		if ExampleVRQuest.sAddDamagedWeapon
			rActionRef.AddItemHealthPercent ExampleWeapon 1 ExampleVRQuest.fDamagedWeaponHealthPercent
		else
			rActionRef.AddItem ExampleWeapon 1
		endif
	endif

End

The way in which I've implemented them isn't important to this tutorial, I've just give you those scripts as examples of how to utilise your settings.

Note the syntax that I've used with these remote variables. You'll have to do the same thing, but obviously replacing ExampleVRQuest with the EditorID of your VR Quest and using your variable name instead of the example one.

Right. Now that your variables have been utilised, it's time to create the options menu.

Creating An Options Menu

Now that your plugin is set up for using an options menu, you can finally add the menu to your plugin. To do this, you'll need to do two things:

  1. Give the player access to the menu
  2. Create the menu

Giving The Player Access To The Menu

Before you create the actual menu, you'll have to set up the plugin so that the player is able to access the menu. By doing this before you start working with the menu code, it'll make testing a whole lot easier.

The method I'm going to describe here is not the only method, although it is the method that I prefer. It consists of two stages:

  1. Give the player a "Menu Key" - A piece of equipment which the player can equip in order to open the menu.
  2. When the player equips the Key, a token will be added to them. A token is a piece of unplayable (invisible to the player) equipment, and in this case will contain the script that controls the options menu.

Before you can use the Menu Key in a script, you're going to have to make it. It's going to be a piece of armour with no Biped Objects (slots) so that equipping it won't force anything else to be unequipped. It's also going to be a quest item, so that the player can't lose it anywhere (this also has the side effect of preventing the player from attaching it to a hotkey).

Remember when you initialised all of your variables by using a SetStage command to run a result script? Now you're going to go back to that result script now and add three more lines:

if player.GetItemCount ExampleMenuKey == 0
	player.AddItem ExampleMenuKey 1
endif

Now, when your variables are first initialised, the Menu Key that you just made will be automatically added to the player.

When the Menu Key is equipped, you'll want it to run some code that adds a token to the player, but before you can do this you have to make the token. It's also going to be a piece of armour, but unlike the Menu Key it's going to have the "playable" flag unchecked. This ensures that the player can't see it in their inventory.

Once you've created the token, you can write a script for the Menu Key that adds the token to the player's inventory. Because the Menu Key is a quest item, it can't be given a hotkey - meaning that the player has to equip it manually from their inventory. If you want the menu to open right then and there, this script will suffice:

ScriptName ExampleMenuKeySCRIPT

short sDoOnce

Begin OnEquip

	set sDoOnce to 1
	AddItem ExampleMenuToken 1 1

End

However, I personally prefer to have the menu open after the player has put away their Pip-Boy. To do this, a timer will need to be used so that the menu doesn't appear as soon as the player starts to put away their Pip-Boy (that's when the game returns to GameMode). It takes about half a second for the player to put the Pip-Boy away, so let's use a script like this:

ScriptName ExampleMenuKeySCRIPT

short sDoOnce

float fTimer

Begin OnEquip

	; Don't need to check MenuMode here, as Quest Items can't be attached to hotkeys
	set fTimer to 0.5 ; It takes about 0.5 seconds to put the Pip-Boy away
	set sDoOnce to 1

End

Begin GameMode

	if sDoOnce == 1
		if fTimer > 0
			set fTimer to fTimer - GetSecondsPassed ; Count down to 0
		else
			; Once the Pip-Boy has been put away, open the Options Menu
			player.AddItem ExampleMenuToken 1 1
			set sDoOnce to 0
		endif
	endif

End

That's looking very nice now, but because the menu is being opened in GameMode you may also want to prevent the player from opening the menu while they're in combat. To do this, you'll need to check whether or not the player is in combat when they equip the Menu Key, and unequip the Key without adding the token if this is the case.

ScriptName ExampleMenuKeySCRIPT

short sDoOnce

float fTimer

Begin OnEquip

	; Don't need to check MenuMode here, as Quest Items can't be attached to hotkeys
	if player.IsInCombat == 1
		ShowMessage ExampleNoMenuCombatMsg ; Prevent the player from opening the menu
		; during combat
		player.UnequipItem ExampleMenuKey 0 1
	else
		set fTimer to 0.5 ; It takes about 0.5 seconds to put the Pip-Boy away
		set sDoOnce to 1
	endif

End

Begin GameMode

	if sDoOnce == 1
		if fTimer > 0
			set fTimer to fTimer - GetSecondsPassed ; Count down to 0
		else
			; Once the Pip-Boy has been put away, open the Options Menu
			player.AddItem ExampleMenuToken 1 1
			set sDoOnce to 0
		endif
	endif

End

Now that that's set up, all that's left is the actual Menu script, which will be attached to the token.

Creating The Menu

The main difference between a single-level menu and a multi-level menu is that the latter requires navigation - the script needs to remember the path that the player took to get to where they are. Our script will achieve this by having a "sMenuLevel" variable to store the current level of navigation, and giving each level of navigation its own "sButton" variable. That way, the script can remember which buttons the player pressed on each level of navigation.

The example menu that I'm going to use for this tutorial will have five levels, each with their own sButton variables:

  • Level 0 - Initialisation->Introduction Message
  • Level 1 - Introduction Message->Main Menu
  • Level 2 - Main Menu->Sub Menu
  • Level 3 - Sub menu->Setting
  • Level 4 - Setting->Value

The basic structure of the script consists of one big GameMode block filled with a list of "if" statements checking the values of sMenuLevel and the various sButton variables. At the highest level, it only checks sMenuLevel:

ScriptName ExampleMenuSCRIPT

short sMenuLevel ; Records the current depth of the ShowMessage framework
; 0 - Initialisation -> Introduction Message
; 1 - Introduction Message -> Main Menu
; 2 - Main Menu -> Sub Menu
; 3 - Sub Menu -> Setting
; 4 - Setting -> Value

; This GameMode block contains all of the ShowMessage framework
Begin GameMode

	; =================================================
	; INITIALISATION --> INTRODUCTION MESSAGE
	; =================================================
	if sMenuLevel == 0 ; Show Introduction Message
	
	endif


	; =================================================
	; INTRODUCTION MESSAGE --> MAIN MENU
	; =================================================
	if sMenuLevel == 1
	
	endif


	; =================================================
	; MAIN MENU --> SUB MENU
	; =================================================
	if sMenuLevel == 2
	
	endif


	; =================================================
	; SUB MENU --> SETTING
	; =================================================
	if sMenuLevel == 3
	
	endif


	; =================================================
	; SETTING --> VALUE
	; =================================================
	if sMenuLevel == 4
	
	endif

End

As you can see, the GameMode block is now divided up into five different segments. Which one runs will depend on the menu's current level of navigation.

Before we look at what any of these blocks will contain in specific detail, I'd like to go over their structure in general.

Basic Structure Of A Menu Level

Each level of our menu is contained within an "if" statement, which checks the value of sMenuLevel. Within this "if" statement the structure of each menu level is basically the same, although deeper levels will be more complicated. Each level, unless stated otherwise, has the following structures in common:

Button Set

Each menu level begins by checking if its sButton variable has been set/reset (i.e. has a value of -1) and, if so, sets it to GetButtonPressed:

set sButtonX to GetButtonPressed

Using this method ensures that the value of each sButton variable is maintained until it is explicitly reset.

Button Check 1

If the sButton variable still has a value of -1 after Button Set, then "Return" is used to end the script for the current frame.

if sButtonX == -1
	Return
elseif ...

Navigation Check

If the script has got this far, then the player must have pressed a button. If the menu level is deep enough, "if" statements are used to determine, via previous sButton variables, which path the player took to their current menu. If the menu level is not deep enough, or there is only one possible path that the player could have taken, there is no need for a navigation check.

if sButtonX-1 == 0 ; Player came through button 0
	; Button Check 2
elseif sButtonX-1 == 0 ; Player came through button 1
	; Button Check 2
elseif ...

Button Check 2

"If" statements are used to cycle through the various buttons that the player could possibly have pressed. If there is a "Back" or "Done" button (normally there won't be both), then it is usually the bottom button. This allows it to be checked with an "else" statement as opposed to an "elseif" statement, which makes it slightly easier to add more buttons to the menu later.

if sButtonX == 0 ; Player pressed button 0
	; Button Result
elseif sButtonX == 1 ; Player pressed button 1
	; Button Result
elseif...
else ; Player pressed Back/Done button
	; Button Result
endif

Button Result

This is essentially the button's "result script". It contains the code that will execute itself when the button is pressed. With the exceptions of "Done" buttons and buttons that leave the player on the same menu, this code will contain a ShowMessage function.

If the button doesn't take the player to the next menu level, the result script is terminated with a "Return" statement. The deepest level is an exception to this, in that it is the buttons that don't leave the player on the same level that are terminated with a "Return" statement.

ShowMessage PreviousMessage
	set sMenuLevel to X-1
	Return

Because the deepest level leaves the player on the same level instead of taking them back to the previous level, the path cannot branch from here so most of the buttons will probably take the player to the same menu. Because of this, the ShowMessage function can be called at the end of the navigation check, after button check 2, instead of being called multiple times in the result for each button.

if sButtonX == 0 ; Player pressed button 0
	...
else ; Player pressed "Back" button
	ShowMessage PreviousMessage
	set sMenuLevel to X - 1
	Return
endif
ShowMessage CurrentMessage

Menu Level Incrementation

Because of the various "Return" statements utilised in each menu level, this code will only execute if the player has selected a button that takes them to the next menu level (or, in the case of the deepest level, leaves them on the same level).

set sMenuLevel to X + 1


Keep these structures in mind as you read through the following sections, which describe the contents of each section of this example menu.

Contents Of An Example Menu

Initialisation

The first section of the script runs when sMenuLevel == 0. Because variables are initialised to 0, this section will run when the script first runs. This section is also the simplest - all that happens in it is the introduction message is called, sMenuLevel is incremented to 1, and sButton1 is intialised:

	; =================================================
	; INITIALISATION --> INTRODUCTION MESSAGE
	; =================================================
	if sMenuLevel == 0 ; Show Introduction Message
		ShowMessage introMessage
		set sMenuLevel to 1
	endif

If you're wondering why I've included an Introduction message before the Main Message, it's quite useful if you have conditions for the buttons in the Main Menu that have to be initialised before each time it's opened. Usually, you'll use an OnAdd block in this script to initialise them.

Introduction Message

Now, because you've set sMenuLevel to 1, the next section of the script will run. In this section, you need to check when the player clicks the button to continue from the Introduction message into the Main Menu by using GetButtonPressed. When the player clicks the button, the script will call the Main Menu, increment sMenuLevel to 2, and initialise the next sButton variable - sButton2:

	; =================================================
	; INTRODUCTION MESSAGE --> MAIN MENU
	; =================================================
	if sMenuLevel == 1

		set sButton1 to GetButtonPressed

		if sButton1 == -1 ; None of the buttons have been pressed yet

			Return

		else ; Show the Main Menu

			; MainMenuMessage contains buttons corresponding to Sub Menus
			ShowMessage MainMenuMessage
			set sMenuLevel to 2

		endif

	endif

Main Menu

This section is a step up again in complexity. Unlike the Introduction Message, the Main Menu contains multiple buttons. That means that, in this section of the script, you need to check which button the player presses and update the Menu accordingly.

There are three types of button in this example Main Menu:

  • Buttons that take the player to a Sub Menu
  • A "Defaults" button that sets all settings to their default values
  • A "Done" button that closes the menu

If the player clicks on a Sub Menu button, we'll need to show the appropriate message, as well as increment sMenuLevel to 3 and set sButton3 to -1. If they click the "Defaults" button, we'll need to set all settings to their default values (with "SetStage ExampleVRQuest 1", remember?), then show the Main Menu again and reset sButton2 to -1. If the player clicks on the "Done" button, we'll remove the token from their inventory to close the menu.

	; =================================================
	; MAIN MENU --> SUB MENU
	; =================================================
	if sMenuLevel == 2

		set sButton2 to GetButtonPressed

		if sButton2 == -1 ; None of the buttons have been pressed yet

			Return

		elseif sButton2 == 0 ; Show the "Weapons Rack" Sub Menu

			ShowMessage WeaponsRackSubMenuMessage

		elseif sButton2 == 1 ; Show the "Item Dispenser" Sub Menu

			ShowMessage ItemDispenserSubMenuMessage

		elseif sButton2 == 2 ; "Defaults" button - reinitialise all settings

			SetStage ExampleVRQuest 1
			ShowMessage MainMenuMessage
			Return

		else ; "Done" button - close Options Menu

			player.UnequipItem OptionsMenuEquipKey 0 1
			RemoveMe

		endif

		set sMenuLevel to 3

	endif

As you can see, this section has the same organisation as the previous section. The only differences are that there are "Done" and "Defaults" buttons and, depending on which button the player pressed, a different menu is shown. We still use GetButtonPressed to check if a button has been pressed, and when one has we increment sMenuLevel and initialise the next sButton variable.

Sub Menu

This section is the similar to the previous section - it's where the player selects the setting that they'd like to change. Once again, there are multiple types of button in these menus:

  • Buttons that take the player to a Setting Menu, where the can select a new value for the setting
  • Buttons that toggle a setting between two values

We're now deep enough in the menu that there are multiple paths that the player could have taken to reach their current menu level. Because of this, we'll need to check the values of the sButton variables of the higher levels, in order to build a kind of cookie-trail.

	; =================================================
	; SUB MENU --> SETTING
	; =================================================
	if sMenuLevel == 3

		set sButton3 to GetButtonPressed

		if sButton3 == -1

			Return ; None of the buttons have been pressed yet

		elseif sButton2 == 0 ; The player came through the "Weapons Rack" Sub Menu

			if sButton3 == 0 ; The "Damaged" setting was selected
				set ExampleVRQuest.sAddDamagedWeapon to (ExampleVRQuest.sAddDamagedWeapon == 0)
				ShowMessage WeaponsRackSubMenuMessage
				Return
			elseif sButton3 == 1 ; The "Condition" setting was selected
				ShowMessage ConditionSettingMessage ExampleVRQuest.fDamagedWeaponHealthPercent
			else ; "Back" button was pressed
				ShowMessage MainMenuMessage
				set sMenuLevel to 2
				Return
			endif

		elseif sButton2 == 1 ; The player came through the "Item Dispenser" Sub Menu

			if sButton3 == 0 ; The "Item" setting was selected
				set ExampleVRQuest.sAddExampleItem to (ExampleVRQuest.sAddExampleItem == 0)
				ShowMessage ItemDispenserSubMenuMessage
				Return
			elseif sButton3 == 1 ; The "Amount" setting was selected
				ShowMessage AmountSettingMessage ExampleVRQuest.sItemCount
			else ; "Back" button was pressed
				ShowMessage MainMenuMessage
				set sMenuLevel to 2
				Return
			endif

		endif

		set sMenuLevel to 4

	endif

As you can see, the highest level of "if" statements in this example checks which Sub Menu the player came though, and the next level of "if" statements checks Setting they just selected. Depending on which button the player selected, either the setting will be toggled or the player will enter a new menu in which they can select a new value for the setting that they selected.

The next section is the final section in this example menu. At this level, the player will be able to choose a new value for the setting that they just selected.

Setting

This section differs slightly from all previous sections, because the player can advance no further in the menu. This means that, instead of taking the player to the next menu level, most of the buttons will leave the player on the current level. This means a couple of structural changes need to take place:

  • The "menu level incrementation" doesn't actually increment sMenuLevel - all it does is reset the current sButton variable to -1
  • Because most buttons in any menu will leave the player on the same menu, the ShowMessage section of the results of these buttons can be moved to the end of the navigation check, after button check 2.
	; =================================================
	; SETTING --> VALUE
	; =================================================
	if sMenuLevel == 4

		set sButton4 to GetButtonPressed

		if sButton4 == -1

			Return ; None of the buttons have been pressed yet

		elseif sButton2 == 0 ; The player came through the "Weapons Rack" Sub Menu

			; Don't need to check sButton3 - it must be equal to 1
			if sButton4 == 0
				set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.25
			elseif sButton4 == 1
				set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.50
			elseif sButton4 == 2
				set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.75
			else ; "Back" button was pressed
				ShowMessage WeaponsRackSubMenuMessage
				set sMenuLevel to 3
				Return
			endif
			ShowMessage ConditionSettingMessage ExampleVRQuest.fDamagedWeaponHealthPercent

		elseif sButton2 == 1 ; The player came through the "Item Dispenser" Sub Menu

			; Don't need to check sButton3 - it must be equal to 1
			if sButton4 == 0
				set ExampleVRQuest.sItemCount to 1
			if sButton4 == 1
				set ExampleVRQuest.sItemCount to 2
			if sButton4 == 2
				set ExampleVRQuest.sItemCount to 3
			else ; "Back" button was pressed
				ShowMessage ItemDispenserSubMenuMessage
				set sMenuLevel to 3
				Return
			endif
			ShowMessage AmountSettingMessage ExampleVRQuest.sItemCount

		endif

	endif

Conclusion

This method of making multi-level menus can be used to make menus with any number of levels that you'd like, although obviously the script will become more complicated at higher levels. You should also remember that your menu doesn't have to function as an options menu. It could be used for many other things - for example, determining which path the player will progress along in a quest.

Now that the script is finished, let's look at the whole thing in one piece!

ScriptName ExampleMenuTokenSCRIPT

short sMenuLevel ; Records the current depth of the ShowMessage framework
; 0 - Initialisation -> Introduction Message
; 1 - Introduction Message -> Main Menu
; 2 - Main Menu -> Sub Menu
; 3 - Sub Menu -> Setting
; 4 - Setting -> Value

short sButton1 ; sButton variable for the Introduction Message level - Menu level 1
short sButton2 ; sButton variable for the Main Menu level - Menu level 2
short sButton3 ; sButton variable for the Sub Menu level - Menu level 3
short sButton4 ; sButton variable for the Setting level - Menu level 4

; This GameMode block contains all of the ShowMessage framework
Begin GameMode

	; =================================================
	; INITIALISATION --> INTRODUCTION MESSAGE
	; =================================================
	if sMenuLevel == 0 ; Show Introduction Message
		ShowMessage introMessage
		set sMenuLevel to 1
	endif


	; =================================================
	; INTRODUCTION MESSAGE --> MAIN MENU
	; =================================================
	if sMenuLevel == 1

		set sButton1 to GetButtonPressed

		if sButton1 == -1 ; None of the buttons have been pressed yet

			Return

		else ; Show the Main Menu

			; MainMenuMessage contains buttons corresponding to Sub Menus
			ShowMessage MainMenuMessage
			set sMenuLevel to 2

		endif

	endif


	; =================================================
	; MAIN MENU --> SUB MENU
	; =================================================
	if sMenuLevel == 2

		set sButton2 to GetButtonPressed

		if sButton2 == -1 ; None of the buttons have been pressed yet

			Return

		elseif sButton2 == 0 ; Show the "Weapons Rack" Sub Menu

			ShowMessage WeaponsRackSubMenuMessage

		elseif sButton2 == 1 ; Show the "Item Dispenser" Sub Menu

			ShowMessage ItemDispenserSubMenuMessage

		elseif sButton2 == 2 ; "Defaults" button - reinitialise all settings

			SetStage ExampleVRQuest 1
			ShowMessage MainMenuMessage
			Return

		else ; "Done" button - close Options Menu

			player.UnequipItem OptionsMenuEquipKey 0 1
			RemoveMe

		endif

		set sMenuLevel to 3

	endif


	; =================================================
	; SUB MENU --> SETTING
	; =================================================
	if sMenuLevel == 3

		set sButton3 to GetButtonPressed

		if sButton3 == -1

			Return ; None of the buttons have been pressed yet

		elseif sButton2 == 0 ; The player came through the "Weapons Rack" Sub Menu

			if sButton3 == 0 ; The "Damaged" setting was selected
				set ExampleVRQuest.sAddDamagedWeapon to (ExampleVRQuest.sAddDamagedWeapon == 0)
				ShowMessage WeaponsRackSubMenuMessage
				Return
			elseif sButton3 == 1 ; The "Condition" setting was selected
				ShowMessage ConditionSettingMessage ExampleVRQuest.fDamagedWeaponHealthPercent
			else ; "Back" button was pressed
				ShowMessage MainMenuMessage
				set sMenuLevel to 2
				Return
			endif

		elseif sButton2 == 1 ; The player came through the "Item Dispenser" Sub Menu

			if sButton3 == 0 ; The "Item" setting was selected
				set ExampleVRQuest.sAddExampleItem to (ExampleVRQuest.sAddExampleItem == 0)
				ShowMessage ItemDispenserSubMenuMessage
				Return
			elseif sButton3 == 1 ; The "Amount" setting was selected
				ShowMessage AmountSettingMessage ExampleVRQuest.sItemCount
			else ; "Back" button was pressed
				ShowMessage MainMenuMessage
				set sMenuLevel to 2
				Return
			endif

		endif

		set sMenuLevel to 4

	endif


	; =================================================
	; SETTING --> VALUE
	; =================================================
	if sMenuLevel == 4

		set sButton4 to GetButtonPressed

		if sButton4 == -1

			Return ; None of the buttons have been pressed yet

		elseif sButton2 == 0 ; The player came through the "Weapons Rack" Sub Menu

			; Don't need to check sButton3 - it must be equal to 1
			if sButton4 == 0
				set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.25
			elseif sButton4 == 1
				set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.50
			elseif sButton4 == 2
				set ExampleVRQuest.fDamagedWeaponHealthPercent to 0.75
			else ; "Back" button was pressed
				ShowMessage WeaponsRackSubMenuMessage
				set sMenuLevel to 3
				Return
			endif
			ShowMessage ConditionSettingMessage ExampleVRQuest.fDamagedWeaponHealthPercent

		elseif sButton2 == 1 ; The player came through the "Item Dispenser" Sub Menu

			; Don't need to check sButton3 - it must be equal to 1
			if sButton4 == 0
				set ExampleVRQuest.sItemCount to 1
			if sButton4 == 1
				set ExampleVRQuest.sItemCount to 2
			if sButton4 == 2
				set ExampleVRQuest.sItemCount to 3
			else ; "Back" button was pressed
				ShowMessage ItemDispenserSubMenuMessage
				set sMenuLevel to 3
				Return
			endif
			ShowMessage AmountSettingMessage ExampleVRQuest.sItemCount

		endif

	endif

End

External Links